Type: high temperature preparation of biodiesel from high acid vegetable oil
Processing Material: vegetable oil, Acidic Oil, Soap-stock, Oil residue, Waste Cooking Oil, Animal Oil
Capacity: 5-500T/D
Major equipment: esterification reactor, distillation column, condenser, reboiler, pressure vessel
Application: biodiesel is a new type replacement fuel from renewable sources
2 Processing Technology of Biodiesel esterification Machine
Huatai patent invention of biodiesel production line adopts high efficiency biodiesel technology at high temperature to obtain biological diesel oil as renewable source. This environmental protective and reproductive biodiesel is available under certain temperature, pressure, catalyst, and form fatty acid methyl ester, and through high biodiesel processing plant production line distillation and rectification technology with high oil purity.
General introduction of biodiesel Technology:
Clean fuel oil featured by renewable and no pollution. Huatai adopts advanced biodiesel technology to get biodiesel from waste cooking oil, oil residue, vegetal oil and animal oil etc. This new type biodiesel is featured by superior performance, no corrosivity, low sulphur content, reducing mechanical wear, clean and no pollution.
Widely applicable biodiesel and low cost. Biodiesel is applicable as fuel oil in diesel engine, but also mixing with diesel at any ratio. Biodiesel technology can reduce human dependence on oil energy, solve problem of diesel exhaust emission essentially, improve air pollution and protect environment. This superior biodiesel technology is widely applied in biodiesel preparing from vegetable oil of cottonseed oil, oil seed oil, soybean oil, waste vegetable or animal oil etc.
Process Flow of high temperature biodiesel (biological diesel oil) preparing method:
1. Heat the methanol to 150 ° C ~ 180 ° C, and heat animal or vegetal oil to 250. C ~ 380° C
2. Heat the vegetal methanol at a molar ratio of 20:1 to 55:1, and inject pressure vessel at the reaction pressure of 10Mpa ~ 14Mpa.
3. Keep the pressure stable within 20-35 minutes for esterification.
4. Inject esterification reaction material into large container, and separate reaction material to obtain biodiesel.
3 Processing Line Chart of Biodiesel esterification Machine
4 Economic and technical index of Biodiesel esterification Machine
Features |
Biodiesel |
Petrodiesel |
200C density(g/ml) |
0.88 |
0.83 |
400CB dynamic viscosity(mm2/s) |
1.9 -6 |
2-4 |
Flash point(P,M airtight glass 0C) |
>130 |
60 |
flammability(cetane number) |
minimum 49 |
minimum 46 |
heat value (MJ/l) |
32 |
35 |
Combustion efficacy(%) |
104 |
100 |
sulphur content(W %) |
0.05 |
0.2 |
oxygen content(V %) |
10 |
0 |
minimum air consumption of burning 1kg fuels according to the chemical method(KG) |
12.5 |
14.5 |
Water hazard rating |
1 |
2 |
biological decomposition rate after three weeks(%) |
98 |
70 |
Jinan Joysun Machinery Co., Ltd. Toujours adhérer aux exigences du processus de qualité du produit de l'utilisateur pour faire une conception soignée, pour fournir des programmes spécifiques pour obtenir un consensus après la fabrication de Seiko. Basé sur la force technique forte, les méthodes d'essai complètes, et l'excellent système d'assurance de qualité, nous assurerons la «qualité d'abord, le client d'abord», responsable de l'installation et de la mise en service, service technique et formation technique. Les opérations de production de l'entreprise dotent le personnel d'équipements, de formations professionnelles et techniques et de démonstrations en direct.
Lorsque le fonctionne, les matières préparées pénètrent dans la chambre d'extrusion à partir de la trémie, puis se déplacent vers l'avant par le pressage rotatif. biodiesel processing plant production line Vissé et pressé. Sous la haute pression sera créé, ce qui crée également un frottement et un mouvement relatif entre les particules matérielles. D'autre part, diamètre de la racine de la vis de pression varie plus d'une extrémité à l'autre, par conséquent, lors de la rotation, non seulement pousse les particules en mouvement, mais tourne également biodiesel processing plant production line vers l'extérieur.