charcoal powder briquette extrudering machine
Product Description
Brief introduction of charcoal powder briquette extrudering machine:
Charcoal powder briquette extrudering machine is mainly used to use the screw extrusion principle to process charcoal powder mixed with a certain proportion of liquid binder into different bar shapes and size of briquettes, with certain strength, also you can choose to make the briquettes with or without a hole in the core part. The utilization of this machine can make full use of the charcoal powder material, you do not need to mix the material with lime, it reduces the cost of fuel, and improves the calorific value of raw material.
140 type charcoal powder briquette extrudering machine:
180 type charcoal powder briquette extrudering machine:
The Features of charcoal powder briquette extrudering machine:
1. First carbonization, and then briquetting, reduces the procedures to 3 stages from the 5 process of firstly briquetting and then carbonization.
2. The service life is greatly prolonged, especially the quick-wear parts, the service life is increased from 40 hours to 4000 hours.
3. The cost of electricity is reduced by 60%.
4. The capacity is increased by 2-3 times, the cost of making charcoal briquettes is reduced.
5. The operation of the machines is become very easy, we show you directly in front of you, or by videos.
6. The weak charcoal is turned into high quality charcoal briquettes, the high quality charcoal is turned into special high quality charcoal.
7. The weak charcoal content is increased from 60% to 70-75%, the high quality charcoal content is increased more than 83%, make the market highly expanded.
360 type high pressure charcoal powder briquette extrudering machine:
Material information of charcoal powder briquette extrudering machine:
1. Applicable raw material: different charcoal powder of biomass material such as: sawdust, wood shavings, wood wastes, branches, rice husk, peanut shell, coconut shell, begasse, sediment, cotton stem, corn stalk, corn cob, etc. After carbonization, the charcoal can be used as raw material. Besides, the carbon black, coal powder, coal dust, coke powder, brown coal powder, coal waste can be also used.
2. The inlet particle size of raw material: it must be less than 2mm.
3. You must add a certain proportion of liquid binder of some kinds of materials for shaping easily, besides, the binder can also increase the hardness of material, and make the briquettes easily burning.
4. The moisture of materials for briquetting must be moderate, the water content should be 12-15%.
Technical parameters of charcoal powder briquette extrudering machine:
| Model | Capacity | Power | Reducer | Speed of Mainshaft | Specifications | Packaging Size |
| LTM-140 | 1-2 T |
7.5/11 kw | ZQ 350 | 46-60 TURN /MIN | Φ 20-40 | 1900*1100*1200 mm |
| LTM-180 | 2-3 T | 11/15 kw | ZQ 400 | 46-60 TURN /MIN | Φ 20-60 | 2100*1500*1200 mm |
| LTM-360 | 3-4 T | 15 kw | ZQ 650 | 46-60 TURN /MIN | Φ 20-80 | 2550*2160*1300 mm |
Installation of charcoal powder briquette extrudering machine:
1. All the part should be cleaned and checked before installation.
2. Install the machines on the level ground, and better on the concrete floor.
3. Before trying the machine, you have to add oil into the lubricant parts.
4. Check whether there is loosen parts, if yes, tight it directly.
5. Inching the machine, and see whether there are clutters and unnormal sounds. If there is no, we can start the machine completely.
6. Driving the machine to run it without any material in for about 3-5 minutes, after make sure the machine works normal and good, we can put the materials in it for production.
7. If the feed opening apperas blocking, use a wooden stick to unclock, and mustn't use the metal of steel stick.
8. Add the oil for the transmission and rotating parts regularly. The temperature of bearing parts shold be less than 60 celsius degree.
9. Stop feeding the materials and make sure there is no any material in the cylinder before stopping the mahcine. Remove the machine head, clean it and theninstall it for next time using.
Bbq charcoal briquettes:
Shisha charcoal briquettes:
Burning conditions of charcoal briquettes:
Assistant machines of charcoal powder briquette extrudering machine:
1. Firstly, you need to crush the powdery material into small size: which should be less than 2mm.
2. Secondly, you need to make liquid binder, to increase the hardness of powdery material, and also make the raw material easily burning.
3. Thirdly: you have to mix the liquid binder with the powdery material evenly for that the powdery material can be easily and better pressed into briquettes.
4. Forth: you can feed the raw material into the briquette machine directly, or use the auto feeder to feed the material evenly into the briquette machine.
5. Fifth: you shall dry the charcoal briquettes by our box-type dryer, or dry it under the sunshine if it is dtrong enough.
Brief introduction of the assistant equipments for this line:
1) Crusher:
It is used to crush the raw material into powdery material for briquetting, the size must less than 2mm, and the smaller, the better the briquettes. This is the first step of making briquettes, this machine is an environmental protect extraction device, which can totally keep the powdery carbon black, not only can save material, but also protect the environment.
2). Binder Mixer and Wheel Mixer:
Binder mixer is an special equipment for this production line, to make the powder easily briquetting, and also increase the hardness of the powdery material. Besides, it ca also make the briquettes easily burning, and the briquettes are smokeless, non-toxic.
Wheel mixer is to mix the powdery material with the liquid binder, but also can grind the charcoal powder to increase its hardness and strength of the briquettes.
3). Auto Feder:
It is used to feed the raw material into the briquette machine for briquetting evenly, to avoid the conditions that too much material jam the machine or too little material can not briquetting.
Packaging and shapping of our machines:
1. Payment:
30% down payment by TT in advance, or pay directly by Crush, 70% TT balance pay off before delivery.
2. Packaging:
1). All the machines will be wrapped up with plastic film firstly (including the motors)2). The plastic film bag wrapped machine, according to the size and weight to make wooden or iron box, put machine in and fixed the box after loading. (The box material can be made as your requirements)3). The machine parts need to be put in a fixed container, should be fixed well, lest collision and wear, or lost.3. Delivery: After receive your down payment, we will prepare and manufacture all the machines for you, within 15-20 days, all will be finiahsed, we will send pictures to show you, after receive your balance, all the machines will be loaded on board and delivered to you.
Our ServicesOur service for our customers:
♥ Before Service:
1. According to our customers special requirements, provide the most suitable project design, process design and the purchase program.
2. Guide customers to choose the best and economical plant, recover investment within short time, and site inspection.
♥ On sale service:
1. Accompany you to check the working conditions of our machines.
2. Inspect the quality of all our machines.
3. Manufacturer the equipments as the contact appears at first time after receive your deposit. Arrange the delivery timely.
♥ After sale service:
1. Send engineers to your site, help you to install and debugging devides, build plant, and training operators, at the same time pass the technology on clay brick production to customers.
2. Guarantee of the equipments quality, maintenance, etc. Solve all the troubles for you timely during your production when receive your call oure-mails.
About our factory:
Through 30 years of development and technology innovation, our Factory price professional charcoal powder briquette extrudering machine Mechanical Plant has been developped to a professional manufacturer set design, manufacture, after-sale service as a whole. In order to meet the different requirements of our customers, we designed and researched many types of charcoal process machines, include charcoal & coal briquette machine, shisha & hookah charcoal tablet machines, charcoal & coal extruder machines, and biomass charcoal briquette machines, etc, and the assistant equipments.
Besides, we have also got the CE, ISO, SGS, etc, several patents, and for many years, our machines have been sold home and abroad, and are highly praised by our customers, especially the foreign customers such as Indonesia, Saudi Arabia, Malaysia, India, South Africa, Canada, Australia, Russia, Spain, Greece, Pakiswait, Turkey, Egypt, Sudan, Uzbekistan, Philippines, and other countries.
Jinan Joysun Machinery Co., Ltd. est une grande entreprise par actions, axée sur la production d'Factory price professional charcoal powder briquette extrudering machine, intégrée à la recherche scientifique, à la production et aux ventes. La société est située dans la zone industrielle de Shandong salut-technologie, couvre une superficie de 50.000 mètres carrés, avec 15.000 mètres carrés deux standard usine industrielle lourde, plus de 160 ensembles toutes sortes de traitement des métaux de grande et moyenne taille, soudage, équipement d'assemblage .Jinan Joysun Machinery Co., Ltd. attache une grande importance aux échanges techniques et à la coopération internationale, a présenté la technologie de pointe sur et artisanat des États-Unis, Allemagne, Australie et autres pays, établit les lignes de production avancées internationales AAAA et base d'essai moderne de première classe.
Jinan Joysun Machinery Co., Ltd. basé sur une forte résistance technique, l'amélioration des méthodes de détection, excellent système d'assurance qualité pour assurer que « la qualité d'abord, le premier client », responsable de l'installation et la mise en service, les services techniques et des produits de formation technique, après l'installation est terminée je vais 9999999 techniciens vos opérations de production de l'entreprise du personnel de l'équipement de formation professionnelle et technique et des démonstrations en direct.