Soybean oil solvent extraction plant /samll scale refined soybean oil equipment
Advanteges of Soybean oil solvent extraction plant:
1) High oil yield, obvious economic benefit.
2) Less residual oil rate in the dry meal.
3) Improving the quality of the meal.
4) Low processing cost, high labor productivity.
1. Introduction of Soybean oil solvent extraction plant:
1) Function: soybean oil solvent extraction machine is an oil extractor through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent.
2) Use range: soybean oil extraction machine fits for pre-press extraction of high-oil- content materials and direct once time extraction of low-oil-content materials.
3) Main parts: soybean oil extraction machine series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping tower, condenser, etc.
2. Main parts of Soybean oil solvent extraction plant:
1) Solvent pumps: continuously spray solvent to the rotary-type extractor.
2) Rotary extractor: spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent (form miscella). After processing, you can get wet meal and miscella (mixed oil).
3) DTDC: used to separate the solvent from the wet meal.
4) Miscella tank 1st: pump the miscella (oil with solvent) into the miscella 1st, then add 10% saline water to it. The phospholipids and impurities in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.
5) Miscella tank 2nd: the purified miscella will be pumped into it.
6) Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.
7) Condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.
Main process of Soybean oil solvent extraction plant:
1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.
2) Meal is send to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.
3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.
4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.
TANZANIA CENTER:
Packing&Deliver:
Contact me freely:
Jinan Joysun Machinery Co., Ltd. par l'innovation et efforçons l'excellence en ressources humaines, la technologie, les produits et services, et d'améliorer constamment le niveau de service à l'acheteur, avec une forte, ciblée et efficace d'améliorer la satisfaction de l'acheteur. "Intégrité, excellence, équipe, responsabilité" est la valeur de notre entreprise, est le facteur clé dans le succès de la formation du personnel.
est principalement utilisé pour les arachides, les noix, les amandes, le soja, le grain de café, graines de sésame et d'autres graines de plantes oléagineuses, le support et le séchage. La plupart des graines oléagineuses doivent être torréfiées pour mieux presser et obtenir un rendement élevé en huile. Soybean oil solvent extraction plant /samll scale refined soybean oil equipment est le contrôle manuel de l'équipement de chauffage électromagnétique, lorsque vous avez frit différentes cultures, la température doit être ajustée en fonction des besoins.
Soybean oil solvent extraction plant /samll scale refined soybean oil equipment utilise la structure horizontale du tambour, un chauffage uniforme pour le matériel de torréfaction, la rotation automatique, l'agitation automatique, le grillage et la décharge. En travaillant, le tambour tournera continuellement, rôtissant le matériel de toutes les directions différentes. Lorsque la cuisson est terminée, il suffit de faire rouler la machine et tous les matériaux seront versés.