oil refining equipment and waste oil refinery

PRODUCT CATEGORIES

oil refining equipment and waste oil refinery

Product details

Features:

JNC series Used motor oil refinery machine

l overview

This machine can be used in black engine oil,Crude oil , plastic oil and shale oil, to get gasoline and diesel oil through distilled catalyst. Pumping into the heater with Waste oil , through the coal (or fuel oil, gas) heating to working temperature, the maximum working temperature about 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of waste oil in reactor is complete, stop heating, and remove residue from the tank of bottom, then this machine can be used again.

2,Systems of equipment

l Reaction tank: waste oil will be pumped into this tank from the primary filter .

l Heating system: by burning coal or fuel oil to make the oil temperature up to setting value. This system equips with insulation system.

l Catalytic system: waste oil reaches the predetermined temperature, via catalytic effect, and then the gaseous hydrocarbons will become gasoline and diesel composition.

l Cooling system: gasoline and diesel after catalytic effect can be condensed into liquid materials

l Temperature control system: ensure that waste oil transform into gasoline and diesel oil, waste oil drying by distillation, can stop heating timely.

l Exhaust gas handling system: a small amount of not liquefied gas via treated, can meet emission standards.

3,Index of oil after treatment:

Yield

Diesel oil: 86-88%,

Gasoline oil: 5-6%,

Oil residue: 6-8%.

Low-speed diesel engine can be used directly.

4. After processing the oil indicator

5. performance characteristics,advantage introduction

l Working principle: waste oil under the action of catalyst distillation to get high quality diesel

l Do not need acid, alkali, clay to refine the final diesel, just use our plate frame filter machine to remove the impurities.

l Direct heating with fuel or gas, convenience, economy, health, safety, environmental protection

l The total cost of processing one ton used oil only USD22(including fuel, electricity and catalyst cost)

l High oil yield: diesel 86~88%,gasoline 5~6%,oil residue 6~8%

l This machine uses a special way heating, high thermal efficiency, and difficult to form carbon fouling, greatly reducing consumable and maintenance costs.

l Currently in the market, the distillation is based on the coil heating; the temperature can’t meet the technical requirements, oil yield only 65%.

l This kind of heating mode can make it easy to scale.what’s more, it needs high temperature pump, which is expensive, easily breakable, need frequent replacement, high cost in the later period

l This machine is safe, reliable, durable, easy operation, low labor intensity, 1 to 2 workers can easily operate the machine.

Quality assurance:

1, product quality assurance for one year, any non-artificial damage, shall be the responsibility of the manufacturer.
2, the manufacturers provide overseas engineers, door-to-door guidance, installation and use.

ABOUT US

Chongqing Junneng Machine Manufacturing Co., ltd. established in 2009, is a professional manufacturer engaged in the research, development, production, sale and service of waste oil recycling machine. We are located in Chongqing, China, with convenient transportation access. Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure customer satisfaction. We produce and sell variety oil refining equipment and waste oil refinery oil purifiers, including Z L A series insulation oil purifiers, R Z L series lubricant oil purifiers, T Z L series turbine oil purifiers, KL series fire-resistant oil purifiers, TLA series light fuel oil purifiers, Z S C waste oil machines through physical chemical ways to get base oil and JL(LY) series portable oil purifier. In recent years we also successfully researched and developed two series waste engine oil recycling equipment: J N C series waste oil recycling to diesel equipment through catalytic distillation and Z S A series waste oil recycling to base oil equipment through oil refining equipment and waste oil refinery distillation. Both of them don’t need sulfuric acid and clay, the output oil after treated will be exactly the same as brand new oil. In addition, we have obtained CE certificates. Our products exported to clients in such regions as North America, Europe, Southeast Asia, Africa, oil refining equipment and waste oil refineryia and East Asia. We are looking forward to cooperate with new and old customers from domestic and overseas market. Believe us, believe your choice.

What is the working principle of the device?

waste oil under the action of catalyst distillation to get high quality diesel

What are the consumption during the production?

low processing costs:The total cost of processing one ton used oil only USD22(including fuel, electricity and catalyst cost)

How many yield of final products?

High oil yield: diesel 86~88%,gasoline 5~6%,oil residue 6~8%

Need to add the sulfate and activated clay?

Do not need acid, alkali, clay to refine the final diesel, just use our plate frame filter machine to remove the impurities.

Operating equipment are in need of a few job?

easy operation, low labor intensity, only 1 to 2 workers can easily operate the machine.

PACKAGE:

Meet the export transport requirements

DELIVERY TIME:

35-60 days after confirming order,detail delivery date should be decided according to
production season and order quantity.

CONTACT US

Tel: (0086) 68932898
oil refining equipment and waste oil refinery 975406651
oil refining equipment and waste oil refinery 18502396226
oil refining equipment and waste oil refinery: 18502396226
http://www.cqjnjx.com
Add: Room 6-1,Unit 1,Building 8,Jinyujiangzhou,NO 63,Bo Qiao Road,Jianqiao Ave,Dadukou District ,Chongqing ,China

CERTIFICATE

All our products are passed the inspection standards included SGS,BV,CE with 100% quality.

Jinan Joysun Machinery Co., Ltd.basé sur une forte résistance technique, l'amélioration des méthodes de détection, excellent système d'assurance qualité pour assurer que « la qualité d'abord, le premier client », responsable de l'installation et la mise en service, les services techniques et des produits de formation technique, après l'installation est terminée je vais Jinan Joysun Machinery Co., Ltd. techniciens vos opérations de production de l'entreprise du personnel de l'équipement de formation professionnelle et technique et des démonstrations en direct.

Jinan Joysun Machinery Co., Ltd. Dédié à la satisfaction du client et fournissant des machines de haute qualité, à haut rendement et rentables. Le résultat est une situation gagnant-gagnant pour nos clients, nos employés et l'entreprise!

oil refining equipment and waste oil refinery Les transformateurs d'huile de noix de coco conventionnels utilisent de l'hexane comme solvant pour extraire jusqu'à 10% d'huile de plus que ce qui est produit avec seulement des broyeurs rotatifs et des expulseurs. Ils raffinent ensuite l'huile pour éliminer certains acides gras libres afin de réduire la susceptibilité à la rancidification. D'autres procédés pour augmenter la durée de conservation comprennent l'utilisation de coprah avec une teneur en humidité inférieure à 6%, un taux d'humidité inférieur à 0,2%, un chauffage à 130-150 ° C (266-302 ° F) et l'ajout de sel ou d'acide citrique .
Jinan Joysun Machinery Co., Ltd. fournir expulseur d'huile hydraulique et scew machine de presse à huile pour extraire l'huile de noix de coco pour ses clients. Grande capacité de production, levage automatique, pressant et filtrant sont des dispositifs de la machine de presse d'huile de vis, également une chaîne de production d'huile de noix de coco est disponible aussi. Contactez-nous pour plus de détails.