Continuous Waste Plastic Oil Purifier Equipment for sale
Product Description
DISTILLATION MACHINE
We are producing two kinds of machine as following:
A--- Intermittent oil distillation plant; B--- Continuous oil distillation plant.
The end product should be diesel kerosene and gasoline when the raw material is crude oil. The capacity of distillation machine ranges from 6 tons per day to 100 tons per day.Regarding to your requirement, you can choose the model JL-2 with the capacity of 10 tons per day of distillation machine.
Advantages:
1.Latest operating tech that can improve 5% output.
2.Latest heating system and warm keeping design which can save fuel 20--30%.
3.All sealed and auto feeding and slag discharging system, available in 350 degree temperature condition.
4.This model is for processing crude petroleum, used oil and pyrolysis oil into gasoline, diesel oil, kerosene, asphalt and heavy oil.
5.The output should be above 75%, water percent affect the data obviously.
3D Drawing
Flow Chart
Technical Sepcification
Type |
BZJ-06 |
BZJ-10 |
BZL-25 |
BZL-50 |
BZL-100 |
|||
Raw material |
Waste Oil, Raw oil, Waste Engine Oil, Waste Raw Oil, Waste Washing Oil |
|||||||
Structural form |
Vertical belt tower |
|||||||
Size of reactor(mm) |
(1600*4400)mm |
(2200*5100)mm |
(3000*5000)mm |
(3600*6000)mm*2 |
(3600*6000)mm*2 |
|||
24-hour Capacity |
6T |
10T |
25T |
50T |
100T |
|||
Rate of oil yield |
70%-80% |
70%-80% |
90% |
90% |
90% |
|||
Power |
20.0 KW |
20.0 KW |
38.0 KW |
50.0 KW |
80.0 KW |
|||
Working form |
Intermittent operation |
Intermittent operation |
Continuous operation |
Continuous operation |
Continuous operation |
|||
Heating mode |
Hot air |
Hot air |
Hot air |
Tubular heater |
Tubular heater |
|||
Material of reactor |
Q245R/Q345R boiler plate |
|||||||
Heating material |
Coal, charcoal, fuel gas, fuel oil |
|||||||
Thickness of reactor |
16mm |
|||||||
Rotate speed of reactor |
0.4-0.8 turn/minute |
Main Features
Main Technical Characteristics
1. The key unit adopts Continuous Waste Plastic Oil Purifier Equipment for sale catalytic cracking technology and chemical extraction technology.
2. There is complete equipment equipped for environmental protection, e.g. waste gas burner and flue gas dust collecting room.
3. Adopt simple chemical method; eliminate the colour and peculiar smell of products.
4. The output capacity of pure raw oil is less than 80% of waste plastic oil refining equipment.
5. The design of unit is reasonable, the manufacturing process is advanced, the operation is highly automatic and the safety facilities are complete.
6. Have multiple purposes.
Domestic initiation
a. The complete set of unit produces no smoke and smell with favourable effects of environmental protection.
b. The pressure release device operates through water circulation, which greatly improves the security of the system.
c. The release of pressure during the production dramatically increases the output within certain time and meanwhile improves the quality of oil from waste plastic oil refining equipment .
d. The heating system adopts hot air heating technology, which improves the safety performance of production and heating efficiency.
e. High efficiency fuel gas heating system. When the heated gas reaches 150 during refining, a large amount of gas will be generated: through methane to butane, which cannot be liquefied under normal temperature. A large quantity of energy will be generated after these gases fully burn within a specially designed gas burner. Then energy will be saved greatly.
The total production consumption ZL-2 of Continuous waste plastic oil refining equipment
1. Power: 120kw/hour in total (but it is not every device start at the same time).
2. Cooling circuit water: 50m3/hour in total (the water can be recirculated and the more the water flow, the better the cooling down).
3. Fuel for heating:
30——40KGcoal for processing one ton raw oil for average.
4. Space for machine: 3000----3500(the smallest square ).
Advantage:
1.Unique technology for increasing the oil output (the oil yield is not less than 90% when the water by extraction is less than 5%);
2.Reducing the fuel consumption (20 kg diesel for each ton of wast oil) and preventing coked.
durning the processing with high tech pyrolysis oil fefining 3.we are good at reducing the sulfur, cloud point and color of the oil, which can be provided separately with additional cost.
Company Pomise:
There is complete aftersale service for series of unit from out company. The warranty period of the main part of unit is 1 year, which completely eliminates customers’ worries.
Real Pictures of Continuous waste plastic oil refining equipment
General Production
Successful Cases
Running plant in Canada--2005
Running plant in Jordan-2012
Running plant in Thailand-2010
Running plant in India-2011
Warmly Welcome to visit our website for more information !
Continuous Waste Plastic Oil Purifier Equipment for sale
Jinan Joysun Machinery Co., Ltd. professionnels de R & D de grains entiers, des équipements de raffinage de l'extraction du pétrole, du matériel de raffinage du pétrole partout dans le pays et exportés vers le Vietnam, l'Inde, la Russie, Hong Kong, Taiwan et d'autres endroits. Hong Renbing plus hospitalier pour « l'innovation scientifique, l'intégrité et durable, la qualité première, les services aux doués « philosophie d'entreprise, dédiée à vous fournir pratique, avec des prix compétitifs et de qualité et un service efficace 0,Jinan Joysun Machinery Co., Ltd. plate-forme de test disponible à tout moment Vous êtes invités à prendre les essais et discuter de la coopération!
Jinan Joysun Machinery Co., Ltd. par l'innovation et efforçons l'excellence en ressources humaines, la technologie, les produits et services, et d'améliorer constamment le niveau de service à l'acheteur, avec une forte, ciblée et efficace d'améliorer la satisfaction de l'acheteur. "Intégrité, excellence, équipe, responsabilité" est la valeur de notre entreprise, est le facteur clé dans le succès de la formation du personnel.