Product : Used Engine Oil Refining to Diesel Equipment by Distillation
1.Usage
KTS-R Series waste oil distillation machine is widely used in car dealer, for distilling waste oil,waste industrial lubricant oil,waste hydraulic oil,waste diesel and waste gasoline, etc. It is applied with the Used Engine Oil Refining to Diesel Equipment by Distillation distillation technology, which can renew all the waste oil into based oil, with features of low cost, high recovery up to 85%, environmental and energy-saving.The waste lubricant oil recycling is not only renew the waste oil, but also reduce the pollutants. It is the first option for waste oil recycling enterprises,and it will bring the greatest economic and social benefits to companies.
2.Introduction for high Used Engine Oil Refining to Diesel Equipment by Distillation molecular distillation technology in waste oil distillation machine
2.1 Waste oil distillation machine with high Used Engine Oil Refining to Diesel Equipment by Distillation molecular distillation technology can convert used engine oil to diesel and base oil . And its technology parameters are as following:
(a) The temperature in the first distillation is up to 140~170℃, the pressure is about 200~1500Pa.Product is gasoline and diesel .
(b) The temperature in the second distillation is up to 170~210℃, the pressure is about 30~100Pa.Product is light lube base oil .
(c) The temperature in the third distillation is up to 210~250℃, the pressure is about 1~20Pa, Product is heavy lubricant oil base oil, the residue can be used as the fuel. In the process of distilling the waste lubricant oil, it will not go through the chemical reaction about pickling, alkaline cleaning, decolorization and precipitation, and no discharge of sodium salt or decolorant, so there is almost no pollution to the environment. The distilled base oil can be made into new lube oil after add suitable additives, its flash point and viscosity can meet the national standard.
2.2 Economic benefits
(a) 8% light oil
(b) 76% the heavy lubricant oil or the light diesel
(c) 13% resins or heavy oil
(d) high quality recycling oil, it will not be oxidized or discolored with air contact.
(e) low cost and high efficiency, the catalyst cost in dealing one ton waste engine oil is about $30.
(f) high automation and uncomplicated operation, it can be operate with only 1 or 2 persons. The time for learning is about 3 to 4 days.
3.Technical Features of waste oil distillation machine
The boiling point under high vacuity is lower than usual. It takes use of multi- level high Used Engine Oil Refining to Diesel Equipment by Distillation distillation technology,and our company acquired different dewatering temperature and different distillate in researching the mineral oil, this provide us related parameters in separating light and heavy oil under the high vacuity. Since the boiling point is much lower in the high vacuity, so the molecule will not degraded or chain broken. The end oil can not only make the flash point or viscosity qualified, but also meet or exceed the original oil quality standard.
FAQ
1.What's the final product after process?
80% -85% base oil, 5% light oil, or 85% -90% diesel.
2.What's the daily disposal capacity?
2-50TPD.
3 What's the main content of your machine?
PLC system can make the operation easily and save labor cost, thermal oil heating system will do no pollution to the air, the Used Engine Oil Refining to Diesel Equipment by Distillation system avoid the base oil pyrolysis and maintain the oil quality, strong steel to keep the machine live Used Engine Oil Refining to Diesel Equipment by Distillation time.
4, Does your process use catalyst
Yes, catalyst will keep the recycled oil stabilization, used that recycled oil oxidized and become black again. So the recycled oil from our machine will keep yellow.
5, Is your machine running continuously?
A: Yes, our machine is running 24hours continuously, But our machine can also be switched into batch by batch, according to your labor working time
6.What kind of raw material does the machine treat?
All kinds of engine oil, car oil, motor oil, ship oil, tire oil and pyrolysis oil.
7.What is your material of your machine?
Carbon steel or Stainless steel (Standard type is SUS304, it can be customized according to your request)
8. Any of the products be customized?
Yes, we can customize the color, industrial power and your logo on machine. On the other hand, if you need the brand ingredients on the machine, you can have the choice on the imported pumps electrical (electrical, Controller ,PLC, touch screen LCD controller )
Welcome to contact us for more detail.
Jinan Joysun Machinery Co., Ltd. par l'exploration et la pratique continue, a mis au point un faible investissement, rendement élevé, de faibles coûts d'exploitation, de haute qualité des produits, des avantages de contrôle de facilité d'utilisation, non seulement des avantages « clairvoyante », mais aussi devant le pied.
Jinan Joysun Machinery Co., Ltd. professionnels de R & D de grains entiers, des équipements de raffinage de l'extraction du pétrole, du matériel de raffinage du pétrole partout dans le pays et exportés vers le Vietnam, l'Inde, la Russie, Hong Kong, Taiwan et d'autres endroits. Hong Renbing plus hospitalier pour « l'innovation scientifique, l'intégrité et durable, la qualité première, les services aux doués « philosophie d'entreprise, dédiée à vous fournir pratique, avec des prix compétitifs et de qualité et un service efficace 0,Jinan Joysun Machinery Co., Ltd. plate-forme de test disponible à tout moment Vous êtes invités à prendre les essais et discuter de la coopération!