shortening equipment jam mixer machine for palm oil factory

high efficient low price cooking oil production line

Equipments which directly related to the palm fruit oil process (from fresh fruit to final products) are divided into six systems as follows:

1.Fruit reception system

1.1 Use truck to transport the ripe and fresh palm fruits from fruit ranch, weigh up them by platform scale and record, and then pour them into the discharging table.

1.2 Start control valve to open the discharging table, then fruit drop in the fruit basket car freely.

1.3 Drag the fruit basket car which loaded with fresh palm fruits to the downward of the bridge crane by power cable tray and cable tray, then use bridge crane to sling the fruit basket car to the track lead to sterilizer sterilizing tank.

2. Sterilizer system

2.1 After drag the fruit basket car into the sterilizer sterilizing tank, close the sterilizer sterilizing tank and open the vent valve below it. Then inlet saturated vapor, close the vent valve after the cold air in the tank was excluded generally, and enter into the period of steaming and sterilizing.

2.2 Close the inlet valve after the sterilizing process. Drain out the water and vapor in tank, then you can open the door of the sterilizer sterilizing tank.

2.3 Drag the cooked fruit basket car to the downward of the beige crane.

3.Threshing system

3.1 Pour the sterilized fruit in the fruit basket car into the unloading equipment.

3.2 Feed the fruit regularly into the fruit-separating machine to separate.

3.3 After twisting and beating in the fruit-separating machine, the fruits will fall off entirely.

4. Pressing system

4.1 Palm fruit was transported to crasher by elevator.

4.2 Fruit was heated in crasher.

4.3 After sterilizing, the broken palm fruit flow into the palm oil press machine to pressing. Oil and water mixture outflow from pressing chamber shell hole, in the same time, the fiber cake and core was discharged from bonehead clearance and then drop in the packing anger of broken cake.

5. Fiber, cake, shell and kernel separation system

5.1 Fiber cake was dropped into packing auger, use interrupted blade to break up the palm cake, evaporate the palm cake constantly during the transportation, and the enter into the fiber and core separation machine. Use induced draft system which compose of draught fan and wind net to transport fiber to boiler room to burn. Palm core of large proportion drops into the bucket elevator from the other side of the fiber and core separating machine and then to transport to the core charging bucket to dry.

5.2 Open the discharging hole which is at the bottom of the core chafing bucket, then palm core drop into husking machine to husk.

5.3 Use shell kernel separator to separate the shell and kernel mixture after husking.

5.4 Kernel are charged into kernel-holding tank and shell are transported to boiler room to burn.

6.Clarification system

6.1 Use vibrated sifting filter to remove residues like fiber in the crude palm oil, then the oil enter into the passivating tank.

6.2 There are indirect and direct steam in the passivating tank. After passivation, palm oil and water mixture are banished to the high-order position tank and then flow into the clarification tank.

6.3 Clarified oil flow into the oil tank, use disc separator to remove water in oil and then use plate heat exchanger to eliminate the residual water completely.

6.4 After shortening equipment jam mixer machine for palm oil factory drying, the oil flow into net oil tank and then feed into the final-product oil tank directly

Palm Oil Press Machine

Our company adopts palm fruit oil press, which is the ideal equipment to press crude palm oil.

palm fruit oil press has the features as follows:

1) Compact and strong structure, and easy operation.

2) The automatic control system which can adjust barrel pressure.

3) High oil pressing efficiency, and residual oil in cake is less than 8%.

4) Low crushing efficiency for palm nut.

We will pack by the protect film inner, water-repellent plastic outside. The wood packing is necessary If send by less than a container. The machine will fixed by steel rope in the container. Make sure it is in good condition when arrived destination.

Engineering design scope of oil pressing machine and sunflower oil press machine and peanut oil press machine

1). Craft flow chart;

2). Equipment layout drawing;

3). Equipment base drawing;

4). Reserved hole & embedded parts drawing and civil engineering condition drawing;

5). Embedded pipeline layout drawing;

6). Embedded pipeline of power circuit drawing;

7). Power electricity layout drawing;

8). Electricity distribution cabinet and operation table schema;

9). Plant layout drawing.

After-sales service scope of oil pressing machine and sunflower oil press machine and peanut oil press machine

1). Equipment installation & commission guidance and training work: buyer offers round-trip

air tickets, VISA fee, sashortening equipment jam mixer machine for palm oil factory, local food & accommodation and other related charges for the

engineer.

2). Warranty period: one year, offering long-time free technology service

Henan Institute of Grain Machinery Manufacturing Co., Ltd. is a large-scale corporate enterprises which is professional in producing grain and oil, agricultural and sideline products processing machinery and equipment with scientific research, manufacturing, sales together, and has long carried out new technology development and applications in oil machinery, food machinery, grains machinery, construction machinery and feed machinery, etc.. Since it has been established, relying on strong technical force, scientific management mechanism, advanced production facilities and excellent after-sales service, our company has made a long-term development, and has been awarded the honoring contract and keeping promises, quality, service, integrity AAA units, and China Famous for many years.

Jinan Joysun Machinery Co., Ltd. est une grande entreprise par actions, axée sur la production d'shortening equipment jam mixer machine for palm oil factory, intégrée à la recherche scientifique, à la production et aux ventes. La société est située dans la zone industrielle de Shandong salut-technologie, couvre une superficie de 50.000 mètres carrés, avec 15.000 mètres carrés deux standard usine industrielle lourde, plus de 160 ensembles toutes sortes de traitement des métaux de grande et moyenne taille, soudage, équipement d'assemblage .Jinan Joysun Machinery Co., Ltd. attache une grande importance aux échanges techniques et à la coopération internationale, a présenté la technologie de pointe sur et artisanat des États-Unis, Allemagne, Australie et autres pays, établit les lignes de production avancées internationales AAAA et base d'essai moderne de première classe.
Jinan Joysun Machinery Co., Ltd. basé sur une forte résistance technique, l'amélioration des méthodes de détection, excellent système d'assurance qualité pour assurer que « la qualité d'abord, le premier client », responsable de l'installation et la mise en service, les services techniques et des produits de formation technique, après l'installation est terminée je vais 9999999 techniciens vos opérations de production de l'entreprise du personnel de l'équipement de formation professionnelle et technique et des démonstrations en direct.