mini crude oil refinery mini oil refinery oil mini refinery
The crude vegetable oil from above mentioned two ways of extracting, oil pressing and/or solvent extraction, will be pumped into oil refinery unit to produce cooking oil at various grades. The main equipment of oil refinery is various kinds of pot and tanks carrying on different tasks with additives. These tasks may include sedimentation/filtering, neutralization (removing free fatty acid), degumming, decolorization (bleaching), deodorization, dewax etc. Different combination of steps and the treating degree of each step result in different grade cooking oil and salad oil.
Neutralizing process of mini crude oil refinery mini oil refinery oil mini refinery
There are 2 methods according to adding different quantity alikali and different oil temperature.
One is weak alkali(10-16 Be) and high oil temperature (75 degrees), who is only used for weak colour and low acidity; The other is low temperature(20 degrees orso ) and density alkali(20 Be orso), whose is used more.
Low temperature(20 degrees or so ) and density alkali(20 Be or so). Adjust the tempetature of oil to 20-30degrees, then put alkali water of 20-30 Be into oil within 5-10 mins, mixing and rise temperate for 20- 60 mins. When the temperature of oil rise to 60 degrees orso, to stop adding heats and immobility for 6-8 hrs to out of the soap particle. Weak alkali(10-16 Be) and high oil temperature (75 degrees) (Omission)
Washing by water of mini crude oil refinery mini oil refinery oil mini refinery
After be out of the soap paticle from the under of refiner, then continustly adding the heats to 90degrees, then add some hot water to washing the oil, note the temperature of water is higher for 5-10degrees than oil temperature. Then mixing them for 5 mins, then immobility for 4 hrs, put off the soap water, so for 2-3 times which is confirmed as the oil quality.
Oil washed is added heat to 105 degrees orso, to mix then dehydrate for 1 hour, also directly is pumped into decolorizer vessel for dry for 30 mins in the soybean crude oil refining project refining equipments supplier condition.
Pump the oil netralized into decolorizer vessel, samely mixing to rise its temperature to 90 degrees, then mixing for 30 mins, to reduce water to 0.1%, then put a little clay (decoloring media) 2-4 % of total oil, mixing for 30 mins, to reduce the temperature to 70 degrees, then filte the clay with oil filter, to get the oil decolorized.
Pump the oil decolorized into deodorizer vessel in 755mmHg of soybean crude oil refining project refining equipments supplier, 240 degrees -260degrees, to distillate for 4hrs wit steams. Then turn off the steams to open the cooler to reduce the temperature to 40-80 degrees, and then check a little oil, if ok to pack it.
refining of mini crude oil refinery mini oil refinery oil mini refinery
Zhengzhou soybean crude oil refining project refining equipments supplier Indutech Machinery Co., ltd (hereafter referred to as "soybean crude oil refining project refining equipments supplier") is a joint-stock machinery manufacturing enterprise, integrating industrial scientific research, production and marketing. The company is located in the Industry Area Zone of Zhengzhou, China.
The main products cover industrial drying machines,industrial crushingmachines, mineral processing machines, brick machines, biomass energetic machines, environment protection equipment, food oil press machines and other mechanical equipment. Our key product include stone crusher,sand maker, stone washing machine, ball mill, flotation cell, AAC block plant, rotaty drying machines, biomass burner, coal gasifier, oil press machine, packaging machine, breeding machines, fertilizer and pellets machineand other machines.
soybean crude oil refining project refining equipments supplier offers not only products with good quality and competitive price, but also possesses the powerful ability in developing the new products and top service.
soybean crude oil refining project refining equipments supplier has independent export rights and offices in many countries & areas. Our products have passed CE certificate, exported to Russia, Kazakhstan, Azerbaijan, Turkey, Kuwait, South Africa, Egypt, Vietnam, Malaysia, India, Indonesia, Australia, Korea, Canada, EU, etc. with annual sale 520 million RMB, earning foreign exchange USD 28 million.
Oil factory
Machines in workshop
De-waxing/winterization process of mini crude oil refinery mini oil refinery oil mini refinery
The standard Bleached Oil enters into the Crystallizing Tanks after heat exchange and cooling. The oil crystallizes and the crystal grows at design temperature. Crystallization speed should be slow and even and the oil should be agitated at the same time. The crystallized oil is sent to the Filter by screw pump to remove wax. Wax is sent to the Wax Tank and then sent to the Wax Storage Tank. Adopt Refrigerating Machine for refrigeration.
This technology adopts mechanical method to dewaxing from the sunflower oil. It is easily operating and the technology is mastered easily, small occupy area, also its cost is lower.
It the raw material is plam oil, it is better if you choose fracnation process equipment to match with oil refining.
Comparison of Dewaxing and FFA Fractionation
Item |
Dewaxing |
FFA Fraction |
Working theory |
Separate the wax or solid fat from liquid oil.. |
Separate the stearine, olein or solid fat from liquid oil. |
Working temperature |
0-15℃ |
24℃ |
Application |
Rice bran oil, sunflower oil, camellia oil, flax seed oil, corn germ oil |
Palm oil, coconut oil, cotton seed oil |
Description |
Dewaxing process means by forcing cooling to precipitate the high melting point wax and solid fat contained in the liquid oil, and separate the wax and fat from oil by filter. |
Palm oil fractionation, which means separate the solid fat from liquid oil by by controlling the process of cooling and crystallization, the palm oil into the low-melting liquid phase (olein) and high-melting solid phase (stearine). Fractionated palm oil can be divided into three components: stearin (palm stearine), soft fat (palm olein) and the middle part (palm midfraction). Melting points of stearin is generally 50 degrees, soft fat is generally about 24 degrees. Stearin for the manufacture of margarine and shortening, does not cause slow crystallization, greasy and after hardening. Palm Olein is an excellent frying oil. Melting point range in the middle part is nsoybean crude oil refining project refining equipments supplier and close to body temperature, is used as a visual substitute cocoa butter. |
Oil Filling machine&capping machine
mini crude oil refinery mini oil refinery oil mini refinery
BSET SERVICE FOR CUSTOMERS:
1. Small trial order are acceptable for you to check our quality and service;
2. Bigger order with bigger discount;
3. Professional guidance are available all the time;
4. We can also help you to do ENGENEERING TEST in our own laboratory.
5. Professional technicians and skilled workers can promise you the top quality of world class;
6. Highly inspecting equipments in every working procedure, quality comes first;
7. Fast & Safe delivery.
Welcome to our factory in ZhengZhou, Henan province, China to have a visit.
Jinan Joysun Machinery Co., Ltd. est une grande entreprise par actions, axée sur la production d'soybean crude oil refining project refining equipments supplier, intégrée à la recherche scientifique, à la production et aux ventes. La société est située dans la zone industrielle de Shandong salut-technologie, couvre une superficie de 50.000 mètres carrés, avec 15.000 mètres carrés deux standard usine industrielle lourde, plus de 160 ensembles toutes sortes de traitement des métaux de grande et moyenne taille, soudage, équipement d'assemblage .Jinan Joysun Machinery Co., Ltd. attache une grande importance aux échanges techniques et à la coopération internationale, a présenté la technologie de pointe sur et artisanat des États-Unis, Allemagne, Australie et autres pays, établit les lignes de production avancées internationales AAAA et base d'essai moderne de première classe.
Jinan Joysun Machinery Co., Ltd. basé sur une forte résistance technique, l'amélioration des méthodes de détection, excellent système d'assurance qualité pour assurer que « la qualité d'abord, le premier client », responsable de l'installation et la mise en service, les services techniques et des produits de formation technique, après l'installation est terminée je vais 9999999 techniciens vos opérations de production de l'entreprise du personnel de l'équipement de formation professionnelle et technique et des démonstrations en direct.