Product Description
2018 waste oil refining processing recycling distillation equipment of ZSA-10
overview:This waste oil refining processing recycling distillation equipment can treat a variety of waste lube oil ,get high quality base oil and a small amount of gasoline and diesel through 2018 waste oil refining processing recycling distillation equipment of ZSA-10 distillation.after pretreatment,waste oil pumped into the distillationKettle,heat to working temperature,can get the base oil ,gasoline and diesel we required.
When reaction complete,stop heating,remove residue from the bottom of the tank,then the machine can be used again.the production cost is low,and the base oil is high quality.this is the most advanced technology in the world in the waste oil recycling line,and suitable for large-scale industrial production.
Systems of equipment
Recovery rate
Base oil:85%~88%(index same as SN150~SN200)
Gasoline :about 3%
diesel:about 3%-4%
Oil residue:6%~8%
Index of oil after treatment
No |
Item |
Unit |
Technical data |
|
Light base oil |
Medium/heavy base oil |
|||
1 |
Viscosity(40°C) |
mm2/s |
16~32 |
28~72 |
2 |
Viscosity index |
|
≥99 |
110 |
3 |
Appearance |
|
Transparency |
Transparency |
4 |
Color index |
ASTMD1500 |
≤1.2 |
≤1.6 |
5 |
Pour point |
°C |
-15 |
-10 |
6 |
Water content |
%W/W |
≤0.05 |
≤0.05 |
7 |
Flash point open |
°C |
≥180 |
≥210 |
8 |
Ash content |
%W/W |
0.005 |
0.005 |
9 |
Carbon residue |
%W/W |
≤0.13 |
≤0.13 |
10 |
Corrosioncopper,100°C3h |
Qualified |
Qualified |
|
11 |
Acidity |
mgKOH/g |
≤0.05 |
≤0.05 |
performance characteristics,advantageintroduction
1 widely usage: can treat gasoline engine oil, diesel engine oil, rubber oil, waste oils and other various cleaning oil
2the total cost of processing one ton used oil only USD30(including fuel, electricity and pretreatment agent)
3 high recovery rate: base oil:85%~88%,gasoline 3%,diesel:3%~4%,oil residue:6%~8%
Current the continuous operation practices in the market, while the good oil come out, at the same time pump waste oil in. This operation is complicated,labor-intensive,and a lot of good oil will be pumped as residue oil , the yield at most up to 72% ,too much residue oil.
4 Do not need acid and clay, get high quality base oil : No unsaturated composition, can storage in a long-term without change its color, also no any bad smell.
5 environmental protection: the whole process is all sealed, won’t release any gas harmful to human and environment, the colloid and asphalting, carbon black in the waste lube oil are all into sludge, can be used as asphalt or fuel.
6 this waste oil refining processing recycling distillation equipment use a special way heating, high thermal efficiency, and difficult to form carbon fouling.safe,reliable,durable.this is the most advanced technology in the world and suitable for large-scale industrial production.
7 easy operation, low labor intensity, only 1 to 2 workers can easily operate the machine.
8 without the use of heat-conduction oil furnace, the heat-conduction oil furnace heating temperature can’t meet the technical requirements, oil yield only 65%,and need regular maintenance; without the use of special high temperature resistant oil pump, the pump is very expensive and is easily broken, continuous operation mode need to frequently replace this pump; without the use of salt furnace heating, the temperature is too high, extremely unsafe; electric heating can’t meet the technical requirements
Customer's reference
1 what kind of raw material the ZSA machine can treat
ZSA machine can treat all kinds of waste lubricant oil,motor oil,car engine oil.these kind of oil can be mixed.
2 what kind of final product we can get
main product is base oil,a little gasoline and diesel
3 how about the oil yield
in normal industrial production,can get at least 85% base oil.this can be assured
4 how to heat the ZSA waste oil refining processing recycling distillation equipment
can use fuel oil or gas to heat,environmental friendly,don't suggest use coal.not good for environment
5 need any other special chemical in the processing
just need the pretreatment chemical.this chemical customer can buy from local market.don't need other chemical.don't need acid and clay.
6 what kind of equipment need customer prepare?
customer just prepare the good oil and waste oil tanks,a water pool and power supply
7 how to install the ZSA machine
engineer will at site for installaton and commissioning,till customer can use smoothly
8 how about the guarantee
5Year Guarantee for main parts,1 Year for mechanical and electrical products. any question of the plant will reply in 24 hours!
9 need how many workers to operate the machine,need any special technologist?
2 workers can easily operte the plant,don't need special technologist
10 about how long can deliver the machine
according to different capacity,usually 30~50 working days can deliver the machine
Company Information
Chongqing Junneng Machine Manufacturing Co., ltd. is a professional manufacturer engaged in the research, development, production, sale and service of waste oil recycling machine and all kinds of oil purifier .we have Passed ISO & CE certification.9 Years Gold Supplier in 2018 waste oil refining processing recycling distillation equipment of ZSA-10.
Related Products
Contact Information
Jinan Joysun Machinery Co., Ltd. est une grande entreprise par actions, axée sur la production d'2018 waste oil refining processing recycling distillation equipment of ZSA-10, intégrée à la recherche scientifique, à la production et aux ventes. La société est située dans la zone industrielle de Shandong salut-technologie, couvre une superficie de 50.000 mètres carrés, avec 15.000 mètres carrés deux standard usine industrielle lourde, plus de 160 ensembles toutes sortes de traitement des métaux de grande et moyenne taille, soudage, équipement d'assemblage .Jinan Joysun Machinery Co., Ltd. attache une grande importance aux échanges techniques et à la coopération internationale, a présenté la technologie de pointe sur et artisanat des États-Unis, Allemagne, Australie et autres pays, établit les lignes de production avancées internationales AAAA et base d'essai moderne de première classe.
Jinan Joysun Machinery Co., Ltd. basé sur une forte résistance technique, l'amélioration des méthodes de détection, excellent système d'assurance qualité pour assurer que « la qualité d'abord, le premier client », responsable de l'installation et la mise en service, les services techniques et des produits de formation technique, après l'installation est terminée je vais 9999999 techniciens vos opérations de production de l'entreprise du personnel de l'équipement de formation professionnelle et technique et des démonstrations en direct.