Product Description
2ton/day edible oil refinery equipment with degum, deacid, decolore
Features:
SS304 stainless steel, electric heating, 2ton/day edible oil refinery equipment with degum, deacid, decolore dehydration.Cooling water tank.
Function:
Refining cans: Degumming, Dephosphorization, Deacidification.
2ton/day edible oil refinery equipment with degum, deacid, decolore cans: Dehydration, Decolorization.
Filter: Fine filtration.
Usage: palm oil, coconut oil, peanut oil, soybean oil, rapeseed oil, avocado oil, sunflower oil and all edible oil.
Features: can achieve low temperature dehydration.
Reduce the cooling water temperature, improve the 2ton/day edible oil refinery equipment with degum, deacid, decolore, thereby reducing the boiling point of water to achieve low temperature dehydration.
Equipment introduction:
This 2tanks(XXJL500-2, XXJL300-2) equipment includes: 1 oil pump,1 stainless gear oil pump, 12ton/day edible oil refinery equipment with degum, deacid, decolore oil pump, 2 mixing motor,1 frame plate oil filter,1 refine oil tank ,12ton/day edible oil refinery equipment with degum, deacid, decolore dehydration tank,1water tank, 1gas catcher
Refining crude oil : soybean oil, mustard seed oil, cottonseed oil, sunflower seed oil, peanut oil, rice bran oil, safflower seed oil, corn germ oil, camellia seed oil, etc.
Operating procedures:
1. Before using, buy some plastic oil tube to connect with the oil pump, insert into the crude oil tank,open the oil pump and open the pipe directed and connected with the first oil tank , besides, ensure the other pipe is closed, then the crude oil is pumped in the first refine oil tank, when the oil quantity is 20cm away from the top part of the oil tank, stop pumping
2. Open heater,this procedure is fully automatically temperature control, when the oil temperature is up to 20-25,open the mixing motor,
3. When the oil temperature is 60-70, add some hot salt water (water temperature should 10 higher than the crude oil)which weighs about 3-5% of the crude oil , among them , net weight of the salt weighs 0.2-0.3% of the crude oil, Besides, spray the salt water uniformly to the oil refine tank within 10-15minutes
4. After finishing spraying water, continue to mix about 20-30minutes, when the temperature is up to 85, stop heating stop mixing
5. Keep the oil precipitation about 2-4hours,
Output the waster water and oil residue by opening the pipe under the oil refine tank
6. Closing the pipe directed to the oil refine tank,open the pipe directed to the dehydration tank, open the gear oil pump, pump the refined oil to the dehydration tank,
7 .Open mixing motor and heater, when the oil temperature up to 70 degree, open the 2ton/day edible oil refinery equipment with degum, deacid, decolore pump, keep the pressure gauge to 0.4-0.5MPa,when the temperature to 95-100, keep observing , if the water content is high, the oil will overflow out of the tank, (if the oil is rolling strongly,stop heating for a few minutes, then reopen the heater), keep the oil temperature to 105-110, observe carefully from the glass window to see if there is steam, if there is none steam , stop heating,when the temperature down to 80 degree, close the 2ton/day edible oil refinery equipment with degum, deacid, decolore pump, and when down to 70degree, close the mixing motor
8. Open the gear oil pump, pump the dehydrated oil to the plate frame oil filter
Deacidification:
1. Pump the oil to the refine tank,open heater,when the oil temperature is up to 20-25,open the mixing motor , till the oil temperature up to 60-70 degree, add some Alkali Liquid, stir with 60r/min for about 20-30 minutes, when the oil has obvious soap particles, stop heating, stop stirring.
In theory, Alkali adding quantity is as below:
7.13x0.001* oil wight * fatty acid content;(1)
extra Alkali should add: oil weight* 0.2%; (2)
Actual Alkali quantity: theory Alkali (1) + extra Alkali (2)
2. Bath by water(to degum and wash out the remained Alkali)
Bath for the first time
When the oil temperature is 70degree, add 70degree salt water which weighs 10% of the oil, and the NaCl content is 0.3% of the oil weight, make it sure to operate within 10minutes. Then stir about 20minuites,when the temperature is up to 85degree, stop heating and mixing, precipitate for 2hours, release the oil soap
Bath for the second time
When the oil temperature is 70-75 degree, add 70degree salt water which weighs 10% of the oil, and the NaCl content is 0.3% of the oil weight, make it sure to operate within 10minutes. Then stir about 20minuites, when the temperature is up to 85degree, stop heating and mixing, precipitate for 2hours, release the oil soap
Bath for the third time
When the oil temperature is 80degree, add 70degree salt water which weighs 10% of the oil, and the NaCl content is 0.3% of the oil weight, make it sure to operate within 10minutes. Then stir about 20minuites, when the temperature is up to 85degree, stop heating and mixing, precipitate for 2hours, release the oil soap
Finally, complete deacid, pump the oil to dehydration(procedure refer to the degum), then open the gear oil pump to filter through the plate frame oil filter, finally to the refined oil tank
Our Factory :
Our factory covers an area of 23,000 square meters, including three large-scale production workshops: the machining workshop, assembly workshop and welding workshop, in addition , we also have the painting workshop, polishing workshop, raw materials workshop, spare parts warehouse, and finished products warehouse.
We receive about over a hundred times of visist from home and abroad a year .
contact for more details and our products , plz contact
Grace
WhatsApp: +8615037798782
Email: seller11 at henansanbang.com
Jinan Joysun Machinery Co., Ltd. est une grande entreprise par actions, axée sur la production d'2ton/day edible oil refinery equipment with degum, deacid, decolore, intégrée à la recherche scientifique, à la production et aux ventes. La société est située dans la zone industrielle de Shandong salut-technologie, couvre une superficie de 50.000 mètres carrés, avec 15.000 mètres carrés deux standard usine industrielle lourde, plus de 160 ensembles toutes sortes de traitement des métaux de grande et moyenne taille, soudage, équipement d'assemblage .Jinan Joysun Machinery Co., Ltd. attache une grande importance aux échanges techniques et à la coopération internationale, a présenté la technologie de pointe sur et artisanat des États-Unis, Allemagne, Australie et autres pays, établit les lignes de production avancées internationales AAAA et base d'essai moderne de première classe.
Jinan Joysun Machinery Co., Ltd. basé sur une forte résistance technique, l'amélioration des méthodes de détection, excellent système d'assurance qualité pour assurer que « la qualité d'abord, le premier client », responsable de l'installation et la mise en service, les services techniques et des produits de formation technique, après l'installation est terminée je vais 9999999 techniciens vos opérations de production de l'entreprise du personnel de l'équipement de formation professionnelle et technique et des démonstrations en direct.