First class oil production crude sunflower oil refinery equipment with CE

First class oil production crude sunflower oil refinery equipment with CE

Sunflower oil refinery equipment flowchart:

Alkali hot water

Crude oil→filter→mix→reactor→mix→reactor→centrifugal separation→oil residue

↑ ↓

Phosphoric acid hot water→mix ↓

↓ ↓

degumming oil←cooler←dry←centrifuge separation←mix←alkali liquor

↓

↓

bleaching earth→mix→decoloring→filter→decoloring oil→mix→heat

↓

refined oil←filter←cool←deodorizing←First class oil production crude sunflower oil refinery equipment with CE

Batch type:

Continuous Type:

Main Section Introduction of sunflower oil refinery equipment:

(1) Refining section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.

(2) Decoloring section: used to remove off pigments, bleaching oils and grease dehydrate.

(3) Deodorizing section: to remove off the odor components in oil.

(4) Dewax: used to remove off the wax in the oil, in order to get the high quality oil.

(5) Heat-transfer oil stove: supply each device production needing heat energy, temperature reach

above 280°C.

(6) Steam generator: produce the needing steam for de-odoring and distillation.

(7) First class oil production crude sunflower oil refinery equipment with CE pump: supply needing First class oil production crude sunflower oil refinery equipment with CE for dehydrate, de-color, deodor. First class oil production crude sunflower oil refinery equipment with CE degree can

reach above 755mm Hg.

(8) Press filter: filter clay, filter out clear oil.

(9) Air compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.

Process specification of sunflower oil refinery equipment:

1.The degummed oil firstly enters into the heater to be heated to the appropriate temperature (110°C),

and then goes to the bleaching earth mixing tank.

2.The bleaching earth is delivered from the low bleaching box to the temporary tank by wind.

3.The bleaching earth is added by automatic metering and is interlockingly controlled with the oil.

4.The main function of decoloring process is to remove oil pigment, residual soap grain and metal

irons.

5.Under negative pressure, the mechanical mixing method combined with steam mixing will improve

the decoloring effect.

6.The oil mixed with the bleaching earth overflows into the continuous decolorizer, which is stirred

by non-powered steam.

7.The decolored oil enters into the two alternate leaf filters to be filtered.

8.Then the filtered oil enters the decolored oil storage tank through the security filter.

9.The decolored oil storage tank is designed as the First class oil production crude sunflower oil refinery equipment with CE tank with the nozzle inside, so as to

prevent the decolored oil contacting with the air and infFirst class oil production crude sunflower oil refinery equipment with CEcing its peroxide value and color

reversion.

Product oil specifications:

The specification of crude sunflower oil

Jinan Joysun Machinery Co., Ltd. est une grande entreprise par actions, axée sur la production d'First class oil production crude sunflower oil refinery equipment with CE, intégrée à la recherche scientifique, à la production et aux ventes. La société est située dans la zone industrielle de Shandong salut-technologie, couvre une superficie de 50.000 mètres carrés, avec 15.000 mètres carrés deux standard usine industrielle lourde, plus de 160 ensembles toutes sortes de traitement des métaux de grande et moyenne taille, soudage, équipement d'assemblage .Jinan Joysun Machinery Co., Ltd. attache une grande importance aux échanges techniques et à la coopération internationale, a présenté la technologie de pointe sur et artisanat des États-Unis, Allemagne, Australie et autres pays, établit les lignes de production avancées internationales AAAA et base d'essai moderne de première classe.
Jinan Joysun Machinery Co., Ltd. basé sur une forte résistance technique, l'amélioration des méthodes de détection, excellent système d'assurance qualité pour assurer que « la qualité d'abord, le premier client », responsable de l'installation et la mise en service, les services techniques et des produits de formation technique, après l'installation est terminée je vais 9999999 techniciens vos opérations de production de l'entreprise du personnel de l'équipement de formation professionnelle et technique et des démonstrations en direct.