Automatic fried potato chips production line
First , Automatic fried potato chips production line equipment:
1, Fried potato chips, potato chips production line process, improve the feed - cleaning peeling - selected clip to improve feed, the slice (article) - rinse - blanching color to dewatering to Fried, oil, seasonings to transport, packaging.The equipment adjustment process can be Fried frozen French fries.
2, this set of equipment is 304 stainless steel material, high output, less manpower, equipment, on-site installation and debugging.
Second, the main equipment
1, cleaning peeling machine
Technical parameters:Overall dimensions: 2000 * 1000, height and other equipment matching, power: 1.1 Kw, using brush cleaning peeling machine, at the same time the work of cleaning and peeling.High efficiency, low loss.Article
2, slice machine
Technical parameters, equipment size 1000 * 1000, height and other equipment matching, power 0.75 Kw.Production of 500-800 kg/h.The article can be sliced and cut.The slice thickness, cutting size can adjust at will.
3, blanching pool
Technical parameters, shape size 3500 * 1200 (length * width), height and other equipment matching.Power 1.1 Kw, can use steam, electric heating, using bubble wave design, so as to avoid Browning chips is exposed to the air oxidation, wash potato chips table at the same time.
Dew in the air oxidation Browning, wash free starch on the surface of the chips at the same time, prevent the starch into the pan, infAutomatic fried potato chips production linece of frying oil consumption of life
4, air drying line(before fried)
Fried before delivery to water process, need conveyor belt automatic transmission, equipment installation 3 fan with axial flow fan in the wind.3000 * 950 size, height and other equipment matching, motor drive power 0.37 kw per table.
5, electric heating fried machine
This equipment is the most advanced Fried equipment.On the basis of different proportion of water and oil, the water below, in the upper heating oil Fried potato chips (article), the direct precipitation residue in water, does not smoke, greatly extend the life span of the oil, bring down the cost.The oil temperature control precision, thus ensures the quality of potato chips, French fries and taste.Work has been completed, the water release, residue will follow together with water flow out.
6, air drying line(after fried)
Fried after conveying deoiling process, need conveyor belt automatic transmission, installation of equipment 3 units, fan with axial flow fan in the wind.Size 3000 * 950 mm, height and other equipment matching, power motor drive for each 0.37 kw.
7, automatic flavoring machine
Technical parameters, shape size 2000 * 700 (length * width) height matching with other devices, power 0.55 Kw.Adopt stainless steel, potato chips (article) uniform turning inside the cylinder, with scattered or spray into the sauce.Seasoning evenly not easily broken.
8, conveyor line
Can be determined according to the customer are equipped with, the longest do not exceed 10 meters.
9,Nitrogen-filled packaging machine
Packaging , filling the nitrogen in the bags, which can effectively prevent bad chips, prolong shelf life.Inflatable, packing and a complete code.
Three, technical parameters
1, products: potato chips (article) production: 500 kg/hour (raw material)
2, Fried temperature: 160-200 degrees adjustable frying time: 2-6 minutes
3, appearance size: 8000 * 1200 * 2200 mm (length * width * height)
4, power: 260 kw
5, mesh belt bracket thickness 3 mm, groove plate thickness of 3 mm, 1.2 mm shell thickness
6, equipped with a set of hoisting system of the electric power 0.75 kw.
7, pressure and for spiral stainless steel mesh belt conveyor mesh belt, mesh belt width is 800 mm, guarantee the Fried products can output in time according to set the time.
8, USES the OMRON (Japan) imported from temperature control module display temperature, PT100 frying temperature measurement, temperature control can be realized section.
9, A set of transmission system, power 1.5 kw.
10, with a frequency converter, Fried 2-6 seconds minutes is adjustable.
11, equipped with exhaust system, effectively eliminate Fried process of lampblack, greatly improve the working environment.11, frying machine main body heat preservation adopts high temperature resistant aluminum silicate material, make the job is pot body temperature in the micro thermal state, prevent scald staff, at the same time reduce the heat consumption, save the energy.
12, with one match the equipment of oil tanks.
Automatic fried potato chips production line Fonction: La machine d'extraction d'huile comestible est un extracteur d'huile par trempage ou pulvérisation du gâteau pré-pressé par un certain solvant organique. Le principe de cette partie est la solubilité différente du solvant.
Gamme d'utilisation Automatic fried potato chips production line: L'extraction par solvant à l'huile comestible convient à l'extraction prépresse des matériaux à haute teneur en huile et à l'extraction directe une fois des matériaux à faible teneur en huile.
Automatic fried potato chips production line Principales pièces: La série de fabrication comprend l'extracteur rotatif, le grille-pain, le 1er évaporateur, le 2ème évaporateur, la tour de dénudage, le condenseur, etc.
Jinan Joysun Machinery Co., Ltd. toujours adhérer à l'utilisateur de faire une conception minutieuse des exigences de qualité des produits, offrent des solutions spécifiques, la fabrication de précision après consensus.
Jinan Joysun Machinery Co., Ltd. basé sur une forte résistance technique, l'amélioration des méthodes de détection, excellent système d'assurance qualité pour assurer que « la qualité d'abord, le premier client », responsable de l'installation et la mise en service, les services techniques et des produits de formation technique, après l'installation est terminée je vais Jinan Joysun Machinery Co., Ltd. techniciens vos opérations de production de l'entreprise du personnel de l'équipement de formation professionnelle et technique et des démonstrations en direct.